LoRa IoT Smart Room Sensor User Guide
T0006338_UG
Version 1.5
TEKTELIC Communications Inc.
Page 20 of 30
2
Installation
2.1
Included Product and Installation Material
The following items are included with each sensor:
•
Smart Room Sensor
•
Mounting Bracket Kit
2.2
Safety Precautions
The following safety precautions should be observed:
•
The Smart Room Sensor is intended for indoor use only.
•
The Smart Room Sensor contains a lithium coin cell battery.
Do not ingest battery, Chemical Burn Hazard.
If a battery is swallowed, it can cause severe internal burns in just 2
hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the
product and keep it away from children.
If you think batteries might have been swallowed or placed inside
any part of the body, seek immediate medical attention.
•
To reduce risk of fire, explosion or chemical burns: replace only with approved 3 V CR2477
coin batteries; DO NOT recharge, disassemble, heat above 100°C (212°F) or incinerate
battery.
•
The Smart Room Sensor requires an external magnet for use with the internal magnetic
switch.
•
Keep magnets away from all children. Small magnets can pose a serious choking hazard. If
multiple magnets are swallowed, immediately seek medical attention.
2.3
Unpacking and Inspection
The following should be considered during the unpacking of a new Smart Room Sensor:
1.
Inspect the shipping carton and report any significant damage to TEKTELIC.
2.
Unpacking should be conducted in a clean and dry location.
