Tekron TCG 01 страница 19 Скачать руководство пользователя | Manualshive

Страница: 19 / 55

background image

TCG 01 User Manual

9

th

Edition: February 2007

Page 13 of 49

6

S

PECIFICATIONS

6.1

Dimensions

Width

160mm

Depth

155mm

Height

40mm (1U)

Weight

0.8Kg

Each TCG 01 unit is supplied complete with antenna, antenna mount, antenna cable and
1U 19” rack-mount hardware. Shipping weight of the complete TCG 01 kit is 4.5Kg.

6.2

Identification

Each TCG 01 unit is shipped with an identification label on the base. The label provides
details of the particular options fitted to the unit, the power supply requirement, and the
serial number.

6.3

Programmable outputs (P2, P3, P4-pin1)

The outputs P2, P3, and P4-pin1 are each independently programmable to provide one
of the following options.

x

DCF-77 pulse simulation

x

Unmodulated (i.e. DC level-shift) IRIG-B (B00x)

x

Modified Manchester Modulated IRIG-B (B22x)

x

Programmed pulse sequence

In the case of “Programmed pulse sequence” above, separate settings are provided so
that a differently programmed pulse sequence can be specified for each of the three
outputs. Each of the three programmable outputs can also be inverted in its operation.
Full details on configuring the programmable outputs are contained in section 6.1 on
page 13.

N.B: P4-pin1 is not available on TCG 01's with DTE serial ports. If not specified,
TCG 01 will ship with a DCE serial port.

A common application for the programmable output on P4-pin1 (RS232 level) is to
provide an independent drive to an RS232-Fibre converter unit for use in transporting
the code signals to a distant location. In such cases, p

pin 1 should be “broken out” of the

normal 9-way cable optionally used to connect to an external PC, and used in
conjunction with p

pin 5 (signal return). Tekron manufactures a range of interface devices

(MOFR’s) that includes such converters.

«
...
17
18
19
20
21
...
»

Содержание TCG 01
























































Отзывы:

Нет отзывов

Похожие инструкции для TCG 01

Бренд: Watt Drive Страницы: 54

Бренд: a-TroniX Страницы: 92

Бренд: Vdwall Страницы: 12

Бренд: Vdwall Страницы: 5

Бренд: Wacker Neuson Страницы: 36

Бренд: Vacon Страницы: 44

Бренд: Pro-Ject Audio Systems Страницы: 3

Бренд: YOKOGAWA Страницы: 4

Бренд: Tektronix Страницы: 74

Delta UM Series

Бренд: MasterPower Страницы: 29

Бренд: Chord Страницы: 2

Click Board ADC 3 click

Бренд: Mikroe Страницы: 2

Бренд: StarTech.com Страницы: 12

Бренд: Vitus Audio Страницы: 80

Бренд: Vanner Страницы: 16

Бренд: Jasco Страницы: 7

Бренд: Kisae Страницы: 12

MAXX SST 1000 VEC049

Бренд: Vector Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды