Tekram Technology S381M, Руководство по установке

Страница: 27 / 34

INSTALLATION
Installation Guide
27
notch notch
DIMM 1
DIMM 2
1
1
1
Installing the Memory Modules (DIMM)
•
This mainboard has two sockets available for 168-pin DIMMs . They can be
3.3 volt Unbuffered Synchronous DRAMs (SDRAM), 3.3 volt FPG or EDO
DRAMs.
•
To ensure reliability, it is recommended to use PC100 SDRAM for
your 100MHz clocked SDRAM performance requirement.
•
DIMM Sizes supported: 8MB, 16MB, 32MB, 64MB, 128MB and 256MB
•
A total of (2) DIMMs can be installed for a maximum RAM capacity of
512MB .
To insert the DIMMs, the modules must be oriented in the correct way. Notice the
notches of the DIMM. Align these notches as shown in the diagram below. Gently
push the DIMM until the retainers on both sides of the socket lock the module in
place. To remove a DIMM, push the retainers outwards to release the module then
pull the module out of the socket.