manualshive.com logo in svg

Tekram Technology S381M, Руководство по установке, Страница: 20 / 34

Поделиться
Скачать
Tekram Technology S381M Скачать руководство пользователя страница 20

INSTALLATION

 

Installation Guide

 

20

Wake-up On LAN Connector (CN10)

 

The Wake-up On LAN function will allow the network to wake up a Soft Power
Down (Soft-Off) PC. However, if your system is in the Suspend mode, you can
wake-up the system only through an IRQ or DMA interrupt. To use the Wake-up
On LAN function, you may also have to enable the related option in the mainboard
BIOS.

 

Connect the cable that comes with your LAN card to this connector on the system
board. Refer to the add-in card’s manual for details.

 

Note:

 Your LAN card must support Magic Packet in order to use the Wake-up On

LAN function.

 

Wake-on-Ring Function (CN11)

 

The Wake-on-Ring function allows the modem to remotely power on the system.
To use this function, you may also have to enable the related option in the
mainboard BIOS.

 

For the function to work for an 

internal modem card

, you must also connect the

Wake-on-Ring cable on the modem card to the 

Wake-on-Ring function connector

on the mainboard.

Содержание S381M



































Отзывы:

Нет отзывов