6-v6_4_en
4
Step-16
Install jumpers on
Ind
plug
and
Mem
plug
depending on selected operating
mode.
Step-17
Install detector cover in its
place (until the click)
Step-18
If during alarm system testing in the initial operation period
(1-
2 weeks) there are generated false “Alarm” notifications
connected with peculiarities of the secured room, one
should remove jumper from
Sens
plug.
8.5
To provide fail-safe operation of alarm system it is
recommended to carry out
testing
and
maintenance
of the
detector
at least 1 time per month
.
Testing should be carried out as follows:
-
Perform moving through detection zone;
-
Check output of "Alarm” notification on control panel and on
indicator if indication is enabled (indicator lights on 1 time for
4s at every movement).
Maintenance should be performed as follows:
-
inspect integrity of the detector’s body, reliability of contact
connections,
detector
fixation;
clean
detector
from
contamination.
9 Labeling
On a label attached to the case are indicated:
- abbreviated marking of the detector;
- firmware version;
- month and year (last two digits) of manufacture;
- conformity mark (if certificate is available);
- barcode, duplicating text information
10 EC Conformity Declarations
This product is in conformity with the provisions of:
EMC 89/336/EEC
EN 61000-6-3:2005 Electromagnetic compatibility (EMC) - Part 6-3:
Generic standards - Emission standard for residential, commercial
and light-industrial environments
EN 50130-4/1995 + A1:1998 + A2:2003 + Corrig. 2003 Alarm systems
- Part 4: Electromagnetic compatibility - Product family standard: Im-
munity requirements for components of fire, intruder and social alarm
systems
EN 60950-1: 2001+A11:2004+Corrig.2004 Safety of information tech-
nology equipment
11 Recycling
Detector is not dangerous for life and health of people and is safe for
environment, after termination of service life it should be recycled
without special environment protective measures
.
12 Warranty
12.1 Quality Management System meets provisions of ISO 9001-
2011.
12.2 The manufacturer provides requirements compliance of detector
in condition of observance of technical requirements concerning
transportation, storage, mounting and operating the detector.
12.3 The storage warranty time is 5 years and 6 months from the date
of manufacturing.
12.4 The operation warranty time is 5 years from the date of operation
start-up but no longer than 5 years 6 months from the date of manu-
facturing.
12.5 The manufacturer commits to replace or repair the product dur-
ing the warranty period.
12.6 The warranty does not come into effect in following cases:
-operation manual is missing;
-mechanical damage of the product;
-repair of the detector by any other party except the manufacturer.
12.7 This warranty applies to the detector only, not to equipment of
third part manufacturers used with the detector jointly.
12.8 User should keep in mind that correctly installed signaling sys-
tem serves to decrease the risk of such events as larceny, robbery or
fire, but not to avoid them at all.
The manufacturer bear no responsibility for death, injury,
damage of property or any other kinds of accidental or
premeditated damages, based on user’s statement that device
failed to implement its function.
Sales:
Controlex GmbH
Warranty service and
technical support:
ТЕКО-TD
Philosophenweg 31-33
47051 Duisburg, Germany
Phone: +49 (0) 203 / 393 91 188
Fax: +49 (0) 203 / 393 91 189
GSM: +49 (0) 178 / 218 48 22
E-mail:
Web:
www.controlex.eu
Prospekt Pobedy str. 19
420138 Kazan, Russia
Phone: +7 (843) 261-55-75
Fax: +7 (843) 261-58-08
E-mail:
Web:
www.teko.biz
Made in Russia
