Teknobil Thuraya Vehicle Docking Adaptor, Руководство по установке и инструкция пользователя

Страница: 5 / 17

7 6
Fuse
Should be connected between the battery and the red lead of the Car Interface Cable. For
maximum safety, place the fuse as close to the battery as possible.
Mounting Legs
Used to fix the Control Box to the interior of your vehicle.
FIGURE 1 Main Components of Your VDA
Before You Install
Please read the Safety Precautions carefully and strictly adhere to the following points:
• Professional installation of your VDA by a qualified auto electrician is strongly recommended.
In other words, unless you have a very good reason, you must use professional help
for installation.
• If your vehicle has airbags, make absolutely sure that airbag deployment area is free
of any objects including installed or portable equipment. As airbags inflate instantly and
with great force, improper installation of portable components of your unit could result
in serious injury if an airbag inflates in such a case.
• Use the supplied fuses for wiring.
Warning Your unit runs on a negative ground 12V electrical system. Connecting
your unit to a power supply with different voltage or polarity can damage your equipment.
Most trucks have 24V DC supplies. In such cases, you must seek professional help
to obtain 12 V DC power supply for your VDA.
Warning Make sure the supplied fuse is properly installed. Otherwise, you may
risk fire in the unlikely event of a short circuit in the system.
The installation of VDA components may vary according to the make and model of your car.
Suggested positioning of the components is show in Figure 2:
Installation