Tekno Point Multisplit air conditioner, Руководство по установке

Страница: 25 / 40

24
● SETTING THE FAN
By pressing the FAN key several times it is possible to adjust the fan speed between the three available speeds, or to
activate the AUTO mode. The operating mode appears on the display:
Auto
Auto, Low ( ), Low-Medium speed ( ), Medium speed ( ), Medium-High speed ( ), High speed ( ).
● I FEEL FUNCTION SETTING
Press this button to turn on I FEEL function. The unit automatically adjusts temperature according to the sensed
temperature. Press this button again to cancel I FEEL function.
● FUNCTION
Press this button to achieve the on and off of healthy and scavenging functions in operation status. Press this button for the
first time to start scavenging function; LCD displays “
”. Press the button for the second time to start healthy and
scavenging functions simultaneously; LCD displays “ ” and “ ”. Press this button for the third time to quit healthy and
scavenging functions simultaneously. Press the button for the fourth time to start healthy function; LCD display “ ”. Press
this button again to repeat the operation above.
● SLEEP MODE SETTING
SLEEP mode can be set in COOLING or HEATING operation mode. This function gives you a more comfortable
environment for sleep.
In SLEEP mode,
♦ Fan speed is automatically set at low speed.
♦ Press the "SLEEP" button to set the unit to the sleep mode. The SLEEP indicator will light up on the display. The
temperature increases/decrease in cooling/heating mode operation by 1°C at set intervals. After reaching 2°C the unit
maintains this temperature through to the eighth hour (8 hours) of operation in the "SLEEP" mode and then switches off
automatically.
● TEMP FUNCTION
Press TEMP key to show the set point temperature, indoor ambient temperature and outdoor ambient temperature on the
unit’s display.
Note: Outdoor ambient temperature is only displayed for some models.
● CLOCK SETTING
To adjust the real time press CLOCK button, then use '' + '' and '' - '' buttons to get the correct time.
♦ Press the key '' + '' / '' - '' once to increase/decrease the time setting by 1 minute.
♦ Press the key '' + '' / '' - '' for 2 seconds to increase/decrease the time setting by 10 minutes.
♦ Press CLOCK button again the real time is set.
● TIMER MODE SETTING
Push the buttons TIMER ON/OFF to set the timer programming as wished in order to switch on and off the air conditioner at
the desired time.
- How to set TIMER ON
TIMER ON
button can be used to set the timer programming as wished in order to switch on the appliance at your desired
time.
1) Press TIMER ON button, "ON" flashes on the LCD, then you can press the ''
+ '' or '' - '' buttons to select your desired time
for appliance on.
♦ Press the '' + '' / '' - '' button once to increase or decrease the time setting by 1 minute.
♦ Press the key '' + '' / '' - '' for 2 seconds to increase/decrease the time setting by 10 minutes.
Note: If you don't set the time in 10 seconds after you press TIMER ON button, the remote controller will exit the TIMER ON
mode automatically.
2) When your desired time displayed on LCD, press the TIMER ON button and confirm it, a beep can be heard and then the
TIMER indicator "ON" the indoor unit stops flashing.
3) After the set timer displayed, the clock will be displayed on the LCD of the remote controller instead of set timer.