9
If you require any technical guidance or find that the product is not operating as intended, please see the
Troubleshooting
section of this manual
III. Installation Instructions
Location
• When selecting a position for your Fr
eezer
you should make sure the floor is flat and
firm,
and the room is well ventilated with an average room temperature of between 16º C
and
38º C.
• Avoid locating your Fr
eezer
near a heat source, eg, cooker, boiler or radiator. Also
avoid
direct sunlight in out-buildings or sun lounges. If you are placing your F
reezer
in an
out-building such as a garage or annex ensure that the Fridge is placed above the damp
course, otherwise condensation will occur on the Fr
eezer
cabinet.
• Never place the Fr
eezer
in a wall recessed or into fitted cabinets or furniture when your
Fr
eezer
is working, the grills at the back may become hot and the sides warm. It must
therefore be installed so that the back of the Fr
eezer
has at least 9 cm (31/2”) of free
space and the sides have 2 cm (3/4”).
• Do not drape the Fr
eezer
with any covering.
Leveling the Fr
eezer
• If the Fr
eezer
is not level, the door and magnetic seal alignment will be affected and may
cause you Fridge to work incorrectly. Once the Fr
eezer
is placed in its final location,
adjust
the leveling feet at the front by turning them until you have a leveled appliance.
Cleaning before use
• Wipe the inside of the Fr
eezer
with a weak solution of bicarbonate of soda. Then rinse
with warm water using a damp sponge or cloth. Wash the baskets or
draws
in warm
soapy water and dry completely before replacing in the Fr
eezer
. The external parts of
the
Fr
eezer
can be cleaned with wax polish.
Before plugging in
• IMPORTANT: Check that you have a socket which is compatible with the plug supplied
with the Fridge.
Before switching on
• IMPORTANT: After the
Freezer
is properly installed and well cleaned, do not switch it
on
immediately. Make sure you allow a minimum of 4 hours before turning on the power
of
the refrigerator. The coolant fluid needs time to settle. If the appliance is switched off at
any time, wait 30 minutes before switching back on to allow the coolant fluid to settle
Before filling your Fr
eezer
• Before storing foods in your Fr
eezer
, turn the Fr
eezer
on and wait for 24 hours to make
sure
it is working properly and to allow the Fr
eezer
to reach the desired temperature.
Содержание UC55F2W
Страница 1: ...UC55F2W...
Страница 17: ...TEKNIX...