TEKNIX UC55F2W, Инструкция по эксплуатации

Страница: 10 / 17

1 2
If you require any technical guidance or find that the product is not operating as intended, please see the
Troubleshooting
section of this manual
Recommended storage periods
• For recommended food storage time, refer to the information given on your food
packaging.
Cleaning inside the Fr eezer
• Do not pour water over the appliance.
• The cavity should be cleaned periodically using a solution of bicarbonate of soda
and lukewarm water (5m to 0.5ltr of water).
• Clean accessories separately with soap and water. Do not put them in dishwasher
• Do not use abrasive products, detergents or soaps.
• After washing, rinse with clean water and dry carefully.
• When you have finished cleaning reconnect the plug with dry hands.
Cleaning outside the Fridge
• Use standard non-abrasive detergent diluted in warm water to clean the Fr eezer exterior ,
or a standard furniture polish for the exterior of Freezer. Make sure the door is closed to
prevent the polish getting on the magnetic door seal or inside.
• The grill of the condenser at the back of the F reezer and the adjacent components can
be vacuumed using a soft brush attachment.
• Do not use harsh cleaners, scouring pads or solvents to clean any part of the Fridge.
Defrosting
• After a period of use, a thin layer of frost will be formed on the freezer compartment
inner wall (or evaporator) surface, which may affect the refrigeration performance if
exceeding 5mm in thickness. In such case, you need to gently scrape the frost off using
an ice scraper rather than the metal or sharp object. Frost needs to be cleared off every
3 months, or if the frost is affecting the normal use of the drawers and or the refrigeration
performance. Follow the following steps to remove frost:
1. Take out the frozen foods, shut off the mains power supply, open the refrigerator door,
and gently remove the frost from the inner wall with an ice scraper. To speed up the
thawing process, it is suggested to place a bowl of hot water inside the refrigerator/
freezer, and when the solid ice particles become loose, use an ice scraper to remove
from surface.
2. After defrosting, clean the fridge/freezer inside, and switch on the power supply.