TEKNIX TKGF51TBL, Руководство пользователя

Страница: 32 / 47

32
Use of gas burners
Ignition of the burners
The position symbol above each control knob indicates the burner that the knob
controls.
Ignition by igniter button:
Push in the knob of the burner you wish to ignite
and keep it pressed while turning it anti-clockwise until the knob is in Maximum
position, now press the Igniter button which will create sparks at the burner - Do not
continuously operate the igniter for more than 15 seconds. If the burner does not
ignite - Wait for 60 seconds before trying again.
Manual ignition of the gas burners
If the igniter fails for any reason, follow the procedures listed below.
For hob burners:
Push in the knob of the burner you wish to ignite and keep it
pressed while turning
it anti-clockwise until the knob is in the ‘maximum’ position. Continue pressing the
knob and hold a
lit match, taper or other manual aid to the upper circumference of the burner. Move
the ignition source away from the burner as soon as you see a stable flame.
For oven burner:
Push in and turn the oven control knob anti-clockwise until
the knob is in the
‘maximum’ position. Hold a lit match, taper or other manual aid to the ignition hole
that is located on the front left corner of the burner. Move the ignition source away as
soon as you see a stable flame.
For grill burner:
Push in and turn the grill control knob clockwise until the
marker on the knob points at the grill sign. Continue pressing the knob and hold a lit
match, taper or other manual aid to the holes on the burner. Move the ignition source
away from the burner as soon as you see a stable flame.
Electrical ignition by spark button
Push in the knob of the burner you wish to ignite and keep it pressed while turning it
anti-clockwise until the knob is in the ‘maximum’ position. While keeping the knob
pressed in, push the ignition button. Make sure that you press the ignition button
immediately as a delay could cause a build up of gas which may result in the flame
spreading. Continue pressing the ignition button until you see a stable flame on the
burner.