TEKNIX SMF165B, Инструкция по эксплуатации

Страница: 19 / 26

2 0
If you require any technical guidance or find that the product is not operating as intended, please see the
Troubleshooting
section of this manual
Reversing the Door Swing
1. Make sure that your refrigerator is unplugged.
2. Pry the hinge cover up and off, remove the three screws that secure the upper hinge to the
door, then remove the hinge.
3. Remove the refrigerator compartment door from the cabinet.
4. Remove the two screws that secure the center hinge.
5. Remove the freezer compartment door.
6. Remove the screws that secure the lower hinge to the right side of the cabinet, then remove
the hinge.
11. Install the freezer compartment door.
12. Move the door bushing from the top right side of the freezer door to the top left side of
the door. And move the left hole cover to the right side.
13. Remove the center hinge screw hole plug on the left side of the cabinet, then install in
the screw holes on the right side of the cabinet.
14. Install the center hinge to the left side with the two screws you removed previously.
15. Get the left door stop from the accessory bag, install it on the bottom left side of the
refrigerator door.
16. Install the Refrigerator compartment door.
17. Move the door bushing from the top right side of the Refrigerator door to the top left
side of the door. And move the left hole cover to the right side.
3