TEKNIX SMF165B, Инструкция по эксплуатации

Страница: 10 / 26

11
3. Level ground
Place the refrigerator on a solid and flat ground (floor) to keep it stable, or else it will give
rise to vibration and noise.
Unobstructed ventilation shall be maintained around the appliance or in an
embedded structure.
Preparations for use
1. Standing time
After the refrigerator is properly installed and well cleaned, do not switch it on
immediately. Make sure you allow a minimum of 4 hours before turning on the power of
the refrigerator.
2. Cleaning
Before use ensure you cleans the internal compartments and all shelves and accessories
with a soft cloth.
3. Power-on
Insert the plug into the power socket to start the compressor. After 1 hour, open the
freezer door, if the temperature inside the freezer compartment drops obviously, it
indicates the refrigeration system is working normally.
4. Storage of food
After the refrigerator runs for a period of time, the internal temperature of the refrigerator
will be automatically controlled according to the user’s temperature setting. After the
refrigerator is fully cooled, put in foods, which usually need 2~3 hours to be fully cooled.
In summer, when the temperature is high, it takes more than 4 hours for the foods to
be fully cooled (Try to open the refrigerator door as less as possible before the internal
temperature cools down).
If the refrigerator is installed in a moisture filled room, make sure to check whether the ground
wire and leakage circuit breaker are normal. If vibration noises are produced due to the
refrigerator making contact with the wall, or if the wall gets blackened by air convection around
the compressor, move the refrigerator away from the wall. Setting up the refrigerator may cause
jamming noise or image chaos to mobile phones, fixed-line telephone, radio receiver, television
sets surrounding it, so try to keep the refrigerator as far away as possible from these items.
If you require any technical guidance or find that the product is not operating as intended, please see the Troubleshooting section of this manual