STEP 12: To put Gables Inner Cover back, bring it in an angle and make sure the slots at the
bottom of the cover engage in the bottom End/Mid Gable Assembly Lips. For Mid Gables
only, place Top Covers back as shown.
NOTE: Must raise the legs before installing Gable Covers.
STEP 11: Tighten Gables Set Screw to prevent Legs from moving inside of the Gables.
Section:
Description:
Page No:
Date:
TIGHTEN GABLES SET SCREW
REINSTALL COVERS BACK
HABH_111
8
of 11
May 2020
ASSEMBLE END & MID GABLES
FRAMES & WORKSURFACES
D4
B
C
End Gables
Mid Gables
D4
End Gables
Mid Gables
C2
Mid Gable
Assembly Lip
B2
End Gable
Assembly Lip
Legs & Cable Tray not
shown for better visibility
Legs & Cable Tray not
shown for better visibility
Gable
Set Screw
D12
C5
Install Grommet
Cap if E-Chain
is not specified.
NOTE: Remove the
covers if needed.
Gable
Set Screw
