STEP 5: Loosen the set screws to move them out of the way to avoid scratching the surface of
legs.
STEP 6: Insert Legs into Gables. Fasten each Leg in place, using the two M6x20mm Hex Head
Screws located at the bottom of the Gables.
Section:
Description:
Page No:
Date:
LOOSEN THE SET SCREWS FROM GABLES
INSERT & SECURE LEGS INTO GABLES
HABH_111
5 of 11
May 2020
ASSEMBLE END & MID GABLES
FRAMES & WORKSURFACES
D4
B
C
End Gables
Mid Gables
D4
B5
C6
NOTE: Before installing
legs, ensure the set screws
on the gables are removed
to prevent scratches.
B
C
End Gables
Mid Gables
Gable
Set Screw
Gable
Set Screw
D13
