Http://www.czkaidi.com
- 2 -
5.
Turn on/off the one touch key function
Step
Operation
Motion
1
Press key “S” for more than 5 seconds
Screen flashes “---”
2
Release key “S”, then press key”1” in 3 seconds.
Letter “H-0” or “H-1”
is indicated on the screen. That means the function is turned on or
turned off
3
Press
∧
or
∨
to modify the function
“H-0” shows the function is turned off, “H-1” shows the function is turned on.
4
Press key “S” for 2 seconds
completed
1. Tacitly approve the one touch key function is turned off.
6. Toggle the display unit format
Step
Operation
Motion
1
Press and hold button S, then press and hold
▼
, keep about 3 seconds
The height information will be changed between centimeters and inches
2
Release the buttons
completed
In inch format, the minimum height variation as the legs move up or down is 0.5 inches, while in centimeter format is 1 centimeter
7. Verify the display switch data to table height
Step
Operation
Motion
1
Set the table at any height, recommended at
the bottom position
Measure the table actual height and write down the number in inches or in
centimeters
2
Press and hold button S, then press and hold
▲
, keep about 3 seconds
The first number is flashing on the screen
3
Release the buttons, then click
▲
or
▼
to
change the first number
The first number is being increased or decreased to the first number you
measured
4
Click button S
The second number is flashing on the screen
5
Click
▲
or
▼
to change the number
The second number is being increased or decreased to the second number you
measured
6
Click button S
The third number is flashing on the screen
7
Click
▲
or
▼
to change the number
The third number is being increased or decreased to the third number you
measured
8
Click button S
Completed
Check the switch display format in inches or in centimeters and toggle to the unit you like and match to the actual measurement. In inch format, the
minimum adjustable height is 0.5 inches, while in centimeter format is 1 centimeter.
