Height-Adjustable Products – Expansion Series / Produits réglables en hauteur - Série Expansion
User Guide / Guide d'utilisation
For additional information on this installation contact Technical Support. Pour plus d'informations sur cette installation contactez le support technique.
2019-02-12
L04-50001_R04.DOCX
1 / 10
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always be followed, including the following:
Read all instructions before using this furnishing.
DANGER
– To reduce the risk of electric shock:
1. Always unplug this furnishing from the electrical outlet before cleaning or servicing.
2. This furnishing has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not
change the plug in any way.
WARNING –
To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Unplug from outlet before putting on or taking off parts.
2. Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
3. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the
manufacturer.
4. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or
dropped into water.
5. Keep the cord away from heated surfaces.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
8. “
WARNING:
Risk of Injury – Keep children away from the motorized table in motion”.
9. Maximum intended load for table surface 150 lbs [68 kg]. (100 lbs [45 kg] for Glass and 1-9/16” thick Solid Surfaces)
SAVE THESE INSTRUCTIONS
SERVICING OF DOUBLE-INSULATED PRODUCTS
In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided on a
double-insulated product, nor is a means for grounding to be added to the product. Servicing a double insulated product requires
extreme care and knowledge of the system, and is to be done only by qualified service
personnel. Replacement parts for a double-
insulated product must be identical to the parts they replace. A double insulated product is marked with the words
″
DOUBLE
INSULATION
″
or
″
DOUBLE INSULATED.
″
The symbol (square within a square) is also able to be marked on the product.
