TWM-1886 WIRELESS ROUTER
–
R01
TWM-1886 WIRELESS ROUTER
–
R01
6
3.3
Supply Connection
Pass the cables from cable holes and strip their ends at a proper length, then make the supply
connections as shown in the following connection diagram. Make sure that the terminal screws are
tightened firmly.
Figure 4
–
Supply Connection Diagram
3.4
Module Interface
Warning:
The supply connection of the wireless router must be made through an uninterrupted power supply. Since the
commands coming from the coordinator cannot be delivered to the devices in case of a power cut, the system will not
work properly.
Warning:
Supply line must not be connected to the reset AUX output.
EARTH
EN54-4
Power
Supply
+24VDC
GND
DOWN Button
UP Button
L1 Led
L2 Led
L4
–
Heart Led
L3
–
Heart Led
Tamper Button
USB
Serial Port
Supply
