Teknim TWM-1885, Инструкция по установке и эксплуатации

Страница: 14 / 22

TWM-1885 ANALOGUE ADDRESSED WIRELESS COORDINATOR – R01
TWM-1885 ANALOGUE ADDRESSED WIRELESS COORDINATOR – R01 13
Delete PAN
Delete PAN Yes
All devices
will be deleted! Delete PAN
Delete PAN Yes
All devices
will be deleted!
Delete PAN
Delete PAN Yes
All devices
will be deleted!
3.6.3.3 Connection Permission
The connection permission must be activated on the wireless network initially for a wireless device to
connect to the wireless network. This permission operation can be carried out from
“ Connection
Permission ” menu. To enter the connection permission screen, navigate through the functions menu
by using UP and DOWN buttons and select “Connection Permission” menu .
Increase or decrease the value by using UP and DOWN buttons for changing the connection
permission. Press FORWARD
button to approve and see the “Successful” inscription on the screen.
Press BACK button to exit from the menu or to cancel the changed value.
Connection Permission
Permission 255
0:Off
1-254:On for seconds set
255:On unlimitedly
Connection permission can be adjusted with or without time limit. The value within “1 - 254” range will
determine for how many seconds the connection permission will be on. This period restarts after each
new connection operation and allows device connection without the need for the user to activate
connection permission over and over again. However, the value
“255” provides the connection
permission to be on for an indefinite period of time. The value “0” must be chosen to turn off the
connection permission again. Activating the connection permission with a time limit can be considered
as a measure taken against the connection permission to be left on without time limit.
“L1” led lights continuously as long as the connection permission is on.
3.6.3.4 Reset PER
PER is an abbreviation being used in the communication technology. It stands for Packet Error Ratio. It
indicates the ratio of the number of erroneous packets sent by the device from the beginning to the
total number of packets sent.
PER values play a role as an important indicator in order to understand the healthy operation of the
wireless system. PER values of devices may increase at the system setup phase due to reasons such as
attaching, detaching, energy, etc. Therefore, in some cases, PER values may need to be reset. To enter
Reset PER screen, navigate through the functions menu by using UP and DOWN buttons and select
“Reset PER” menu .
Waiting..
Successful