Teknim TWM-1885, Инструкция по установке и эксплуатации

Страница: 10 / 22

TWM-1885 ANALOGUE ADDRESSED WIRELESS COORDINATOR – R01
TWM-1885 ANALOGUE ADDRESSED WIRELESS COORDINATOR – R01 9
18850601200001
>1.Address: (1)0
2.Tamper Active
3.6.2 Settings
This is the menu which device address, number of devices, channel, language and screen contrast
settings can be adjusted.
Settings
To enter the menu : “ Main screen ” > FORWARD > DOWN > “ Settings ” > FORWARD
Settings
>1.Addressing
2.Number of Devices
3.Channel
4.Language
5.Contrast
3.6.2.1 Addressing
The address range within which the Addressed Wireless Coordinator module will be displayed on the
Analogue
Addressed Panel is determined with the “Addressing” setting . To enter the addressing
screen, navigate through the settings menu by using UP and DOWN buttons and select the
“ Addressing ” menu.
Use the UP and DOWN buttons to change the address value by increasing or decreasing the value.
Press FORWARD button to approve
and see the “Successful” inscription on the screen . Press BACK
button to exit from the menu or to cancel the changed value. Address value cannot be selected higher
than 225.
Addressing
Address 10
1:225 range
As explained in the technical specifications section, “31” devices can be connected to the Addressed
Wireless Coordinator module. A wireless system, together with the Addressed Wireless Coordinator
module, covers a total address area of "32" the most. Example: The address value selected as "10"