å
Fasten the LEFT DRAWER SLIDES (3) to the LEFT END (B)
and the RIGHT DRAWER SLIDES (4) to the RIGHT END (C).
Use eight SILVER 1/2" FLAT HEAD SCREWS (18).
å
NOTE: For each DRAWER SLIDE, turn a SCREW into the
hole shown in the enlarged diagram. Then, slide the inner
cartridge of the DRAWER SLIDE in to fi nd the other hole
that lines up with the hole in the END. Turn a SCREW into
this hole.
å
NOTE: The tabs should be oriented as shown.
Step 3
SILVER 1/2" FLAT HEAD SCREW
(8 used for the SLIDES)
18
B
3
4
4
3
C
Use the fourth
hole from the end.
Page 7
www.sauder.com
417047
Some assembly
(and snacks) required.
Open end
Open end
tab
tab
