background image

Technical Data

tekmar Control Systems Ltd., Canada
tekmar Control Systems, Inc., U.S.A.

Head Office: 5100 Silver Star Road
Vernon, B.C. Canada V1B 3K4
(250) 545-7749  Fax. (250) 545-0650
Web Site: www.tekmarcontrols.com

Product design, software and literature are Copyright © 2008 by:
tekmar Control Systems Ltd. and tekmar Control Systems, Inc.

8 of 8

All specifications are subject to change without notice.

Printed in Canada. W 162 - 12/08.

tekmarNet

®

4 Setpoint Control 162 

One Stage Heat / Cool

Control

Microprocessor PID control; This is 

not a safety (limit) control

Packaged Weight

0.46 lb. (210 g)

Enclosure

White PVC plastic

Dimensions

2-7/8” H x 2-7/8” W x 13/16” D (73 x 73 x 21 mm)

Approvals

CSA C US, CSA/UL 61010-1, meets Class B: ICES and FCC Part 15

Ambient Conditions

Indoor use only, 32 to 122°F (0 to 50°C)
92% RH up to 104°F (40°C), 50% RH if > 104°F (40°C)
Altitude <9840 feet (3000 m), Installation Category II, Pollution Degree 2

Power Supply

24 V (ac) ± 10% 50/60 Hz, 3.2 VA, NEC / CEC Class 2

Relays

24 V (ac)  2  A

Sensors

NTC thermistor, 10 k  @ 77°F (25°C ± 0.2°C) ß = 3892

 

– Included Universal Sensor 071

 

– Optional tekmar type #070, 071, 072, 073, 076, 077, 078, 079, 082, 083, 084

The installer must ensure that this control and its wiring are isolated and / or shielded from strong sources of electromagnetic 
noise. Conversely, this Class B digital apparatus complies with Part 15 of the FCC Rules and meets all requirements of 
the Canadian Interference-Causing Equipment Regulations. However, if this control does cause harmful interference to 
radio or television reception, which is determined by turning the control off and on, the user is encouraged to try to correct 
the interference by re-orientating or relocating the receiving antenna, relocating the receiver with respect to this control, 
and / or connecting the control to a different circuit from that to which the receiver is connected.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

Содержание tekmarNet4 Setpoint Control 162









Отзывы: