6
Powering iPod
The amount of hours myPower for iPod provides depends on the iPod model and the type of playback.
myPower for iPod provides the following extended playback hours:
(This time will be reduced when the iPod backlight is turned on.) While powering iPod, myPower for iPod can
be used to transfer or manage music at the same time.
To power iPod:
1. Place iPod into myPower for iPod.
2. Switch the power switch to On.
3. To stop powering, switch the power switch to Off.
NOTE:
As myPower for iPod powers iPod, the battery capacity in myPower for iPod will decrease and each light
on myPower for iPod will begin to turn off in sequence from right to left. When myPower for iPod is completely
out of battery, the red light will turn off. At this point, you must charge myPower for iPod.
myPower for iPod
Power Switch
iPod
MP1100 Extra Playback Hours
Audio
Slideshow
Video
iPod with video
42
12
9
iPod with color display
36
12
iPod photo
36
12
iPod mini, 6GB
42
iPod mini, 4GB
28
iPod, Click Wheel (4G)
32
iPod, Dock Connector (3G)
20
mp_UG_RevC_r1 4/3/06 11:18 AM Page 6
