5
USER GUIDE
To adhere the rectangular sizing pads:
1. Peel the back of each sizing pad, and adhere it to the inside front curve of the
arm (about 2mm from the front) as shown.
To place iPod mini in myPower for iPod:
1. Remove the attached arms by gently pushing one arm toward the back of
myPower for iPod. (If you wish to use the belt clip, remove the belt clip and
place the belt clip with the
arrow pointing down
on the mini clip arms.) Snap
the myPower for iPod mini clip into place.
2. Slide iPod mini between the frontmost brackets on the mini clip as shown.
To place iPod in myPower for iPod:
1. Slide iPod down the face of myPower for iPod until the iPod dock
connector is firmly inserted in to the 30-pin myPower for iPod connecter.
The arms will hold iPod in place.
To remove the optional belt clip:
1. Gently push one arm toward the back of myPower for
iPod. The belt clip and arms will separate from myPower
for iPod.
2. Unclip the belt clip from the arms, and snap the arms
back into place to secure iPod. The large dot on the
clip will snap into the large slot on the back of
myPower for iPod.
Removable
Belt Clip
Placing iPod
into myPower
for iPod
Larger dot matches
the larger slot on
the back
Placing iPod
mini into myPower
for iPod
Adhering
rectangular
sizing pads
mp_UG_RevC_r1 4/3/06 11:18 AM Page 5
