6
EXTERNAL INSTRUMENT BATTERY
Charging through the 6-Pin Input Port
1. Connect the 6-Pin end of the Smart 6-Pin Adapter into the 6-Pin Input Port on
myPower ALL (shown) and the other end into the solar panel output port.
2. Verify that the charging indicator next to the input jack on the
Smart 6-Pin Adapter (shown) turns on to indicate the battery
is charging.
3. After approximately four hours, press the Capacity Display button
to view the battery capacity. If the capacity does not indicate full
(all blue LEDs on), continue to charge the battery until the battery
capacity indicates full.
4. When the battery capacity indicates full, unplug the connected
charging cable.
Using myPower ALL Plus
myPower ALL Plus can be used to power and/or charge any device that requires between 5 and 19V, plus
a second smaller 5V device like a smart/mobile phone, iPad
®
or iPod
®
. With devices that require higher
voltage levels, like laptop computers and portable DVD players, we recommend that you use myPower ALL
Plus only to power the device. You will find that powering without charging your higher voltage device will
maximize the battery life of myPower ALL Plus, thus letting you use your portable device even longer.
To use myPower ALL Plus to power and/or charge your device, take these steps which are described in
detail in the following sections.
• Select an adapter tip for your main device and connect the tip to the output cord.
• Connect the power output cord to myPower ALL Plus.
• Adjust the voltage level to match that of your device.
• Connect the adapter tip/output cord to your device.
•
To the USB port, connect a 5V device using an adapter or the device USB cable (optional).
6-Pin
Port
