1.By manual :long press the key with lock icon .
2.Auto-lock: Set time to active auto-lock .It will be invalid when re-turn on radio .
3.Auto-lock + memory : Set time to active auto-lock .It will be valid when turn on radio
again.
Tail Elimination
You can eliminate tail by reversed CTCSS Signal or phases state after ending transmitting with
CTCSS signaling .
Item
Description
FRE
Tail elimination by frequency
120FRE
Tail elimination by 120 degree Frequency
180FRE
Tail elimination by 180 degree p Frequency
240FRE
Tail elimination by 240 degree p Frequency
OFF NO
tail
elimination
120
Tail elimination by 120 degree phasing
180
Tail elimination by 180 degree phasing
240
Tail elimination by 240 degree phasing
Back Light
1.Off: Turn off the LCD back light.
2.ON :Turn on LCD back light and keep lighting at certain time.
Duration : choose desired duration for keeping lighting duration .The number after AUTO icon
is duration.( Unit: second)
Channel Name Display
Tick
√
: Display
Not tick
√
: No Display
Beeper
Turn beeper on/off . If turn off beeper ,key tone and power on tone will not be available .
End-of-Transmission Tone
Turn End-of-Transmission tone on/off . If enabled ,your two way radio will transmit a tone when
you finish transmitting .
Monitor End-of- Transmission Tone
If enabled this monitor function ,you can hear the indicating sound when finish transmitting.
Decode tail elimination by frequency without CTCSS/DCS decode
Tail elimination by frequency at channel without CTCSS/DCS decode .
Encode tail elimination by frequency without CTCSS/DCS encode
Tail elimination by frequency at channel without CTCSS/DCS encode .
