TEKELEK Eco Water Monitor, Руководство пользователя

Страница: 3 / 14

Eco Water Monitor User Manual
2 |
P a g e
9-5939-03
1. Product Information
1.1 Definitions/Glossary
Ullage The distance from the sensor to the surface of the liquid in the tank.
Outlet The connection point from which water is drawn from your tank. It is typically located 8cm/3ins. above the bottom
of your tank in one of the sidewalls. Water below the outlet level is not usable.
Offset The height at which the Eco-Water sensor is located or fixed above the top surface of the tank
Vent A small chimney-like feature on the top of your tank. It allows the air within the tank to be released when the tank
is being filled.
Brim-full Tank Capacity The maximum amount of liquid that can fit in the tank.
Usable capacity The nominal capacity of the tank minus the amount of water that is below the outlet or discharge point. If the
water level falls to the level of the outlet, your tank is effectively empty.
Matching The process of uniquely matching the sensor and the monitor.
RF Radio Frequency - the tank level measurements are conveyed wirelessly to the monitor from
the sensor using RF transmissions.
SETUP mode SETUP mode is used to configure the monitor for your water tank.
LEARN mode
LEARN mode is used to match the sensor with the monitor.
NORMAL mode NORMAL mode is for day-to-day use of your monitor - this mode displays tank level as a remaining liquid volume,
a % of tank capacity or as the liquid height in the tank.
1.2 Introduction
Thank you for selecting the Tekelek Eco-Water . This water tank level monitoring system allows today’s
environmentally conscious consumer to monitor their water tank level in real time, informing about the
remaining volume of water in the tank, so further usage can be planned
The Tekelek Eco-Water product from Tekelek Europe Ltd consists of the Tekelek Eco-Water Sensor and the
Tekelek Eco-Water Monitor . The Tekelek Eco-Water Sensor is easily installed on your water storage tank to
measure the level of water. It transmits the water level information wirelessly to the Tekelek Eco-Water
Monitor which may be located in a convenient location inside your home.
The Tekelek Eco-Water Sensor uses ultrasonic technology to measure the distance from the Sensor on top of
the tank to the surface of the liquid in your water tank. As the amount of water in your tank decreases, the
distance measured increases accordingly. The distance information or ‘ullage’ is transmitted wirelessly to the
Tekelek Eco-Water Monitor.