Teka RVU 10020 GBK, Руководство пользователя

Страница: 31 / 64

OPERATING YOUR WINE COOLER/BEVERAGE COOLER
AND SETTING THE TEMPERATURE CONTROL

Control System Instruction

①
“ ” Button
To control this appliance turn on/off
( press and hold this buttons for approximately
3 seconds).

②
“ ” Button
To control the inner light turn on/off.

③
“ ” Button
Used to raise(warm) the temperature in 1
℉（
1
℃）
.

④ “ ” Button
Used to lower(cool) the temperature in 1
℉（
1
℃）
.

⑤
“
ο
”
Indicator light illuminates to signify the cooling mode is currently in operation.

⑥ “DISPLAY”
To shows the set temperature.

Setting The Temperature Controls
Set the desired cooling temperature by pressing the buttons adjacent to the" " or " " indicators.
Each press of the buttons will scroll through the available temperature settings in increments of 1
°
C.
The temperature setting can be adjusted from 5
℃
to 18
℃
.

If you want to reveal actual temperature, please press and hold the " UP " or " DOWN " button for 3
seconds, the LED will flash and display the actual temperature. After stopping pressing the button for 5
seconds, LED figure will stop flash, then revert back to display the set temperature.
Flashing LED = Cabinet temperature
Steady LED = Set temperature
Replaceable (LED only) light source by a professional
This product contains a light source of energy efficiency class G.

Temperature Alarm
If the temperature inside is higher than 23
℃
, it will display "HI" on the display panel, and after one hour after the
alarm / buzzer will sound. This indicates that the temperature inside is too high. If the temperature inside is lower than
0
℃
, it will display "LO" on the display panel and at the same time the alarm also malfunction indicator is active.
29