4. Operation Of The Unit
Basic Functions Of Electric Water Heaters
Key Name
Actual temperature
Power off memory
Factory default
Automatic sleep
function
Anti-freeze protection
“ECO” Key
Function Name
“ - ” Key
“ + ” Key
Control panel(as shown)
①
“ON/OFF” key:
Press the key; the indicator light shall be on for 2 seconds after power-on.
In case of power down, the user settings will be saved by the memory
function and restored once the power is on again.
To switch off the system press” ON/OFF”.
6
Selected temperature
ECO/SMART CONTROL
function
Heating/heat
preservation function
2
3
4
1
5
“ON/OFF” Key
Temperature
information area
By pressing the “ON/OFF” key under any working state, the system
will switch off (except in case of fault state; the indicator lights will flash
and show the corresponding fault phenomenon). When the system is
switched off all lights will be off.
First time the appliance is turned on the mode ECO is activated
automatically. To change the temperature, press the eco bottom to
disconnect the function and then, regulate the temperature desired
with "+" and "-" bottoms.
NOTE
●
●
