English
107
This empties the cappuccino maker of all traces
of milk.
IMPORTANT: to ensure the hygiene of the ap
-
pliance, you are recommended to carry out this
procedure each time you make cappuccino to
avoid stale milk remaining in the circuit.
• Wait a few minutes for the cappuccino maker
to cool down, then holding the cappuccino
maker lever firmly in one hand, unscrew the
cappuccino maker itself with the other, turn-
ing it clockwise and removing it downwards
(fig. 20).
• Remove the cappuccino maker nozzle (A11) by
pulling it downwards (fig. 21).
• Wash the cappuccino maker and nozzle thor
-
oughly in hot water.
• Make sure the two holes shown in figure 22 are
not blocked.
If necessary, clean with a pin.
• Replace the nozzle by inserting it and rotating it
vigorously upwards into the cappuccino maker.
• Replace the cappuccino maker by pushing it
upwards and rotating it anticlockwise.
CLEANING AND
MAINTENANCE
Before performing any cleaning operations, leave
the machine to cool down completely and unplug
from the mains power supply. Never immerse the
coffee maker in water. It is an electrical appliance.
Do not use solvents or abrasive detergents to clean
the coffee maker. A soft damp cloth will suffice. Never
wash any of the components of the coffee maker in
the dishwasher.
Cleaning the coffee maker
The following parts of the machine must be cleaned
regularly:
• Coffee grounds container (A4).
• Drip tray (A14).
• Water tank (A12).
• Coffee spouts (A13), cappuccino maker nozzle
(A11) and cappuccino maker spouts (A10).
• Pre-ground coffee funnel (A21).
• Inside the machine, accessible after opening
the service door (A2).
• Infuser (A5).
Cleaning the coffee grounds
container
When “EMPTY GROUNDS CONTAINER” is displayed,
the grounds container must be emptied and cleaned.
Until the grounds container has been cleaned, the
appliance continues to display the message and
coffee cannot be made.
To clean:
• Open the service door (A2) on the front of the
appliance (fig. 13), extract the drip tray (A14) (fig.
14), empty and clean.
• Empty the grounds container and clean thor
-
oughly to remove all residues left on the bottom.
Important!
If the drip tray is not emptied
regularly, the water could overflow from the edge
and seep inside or around the coffee maker.
This could damage the appliance and cabinet.
The drip tray is fitted with a level indicator (red)
showing the level of water it contains (fig. 24).
Before the indicator protrudes from the cup tray, the
drip tray must be emptied and cleaned.
Cleaning the drip tray
Important!
If the drip tray is not emptied
regularly, the water could overflow from the edge
and seep inside or around the coffee maker.
This could damage the appliance and cabinet.
The drip tray is fitted with a level indicator (red)
showing the level of water it contains (fig. 24).
Before the indicator protrudes from the cup tray, the
drip tray must be emptied and cleaned.
To remove the tray:
1. Open the service door (A2) (fig. 13).
2. Remove the drip tray (A14) and the grounds
container (A4) (fig. A14).
3. Empty the drip tray and grounds container (A4)
and wash them;