DATE
9-25-17
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.tekaillumination.com • [email protected]
REFERENCE NUMBER
INS-2533-00
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
WIRING DIAGRAM
LED - For use with 12VAC
remote transformer or magnetic
transformers only. TEKA Illumination
cannot guarantee performance with third
party manufacturers’ transformers.
1. Loosen two (2) #8-32 set screws on shade
assembly using a 5/64” Allen wrench and remove.
To Replace Components
4. Replace shade assembly. Tighten two (2) #8-32
set screws on shade assembly using a 5/64” Allen
wrench.
PROJECTOR PATHLIGHT (PRP)
2. Loosen two (2) #8-32 set screws with 5/64” Allen
wrench on heatsink body to disengage LED
assembly.
3. Disengage LED assembly and driver. Replace
with new LED and driver assembly. Tighten two
(2) #8-32 set screws on heatsink with 5/64” Allen
wrench to secure.
1. Mount stem onto suitable enclosure and/or
mounting option according to designed lighting
plan.
3. Make watertight connections from remote
magnetic transformer to fixture leads using
waterproof wire connectors (By Others).
See
wiring diagram.
2. Secure stem with locknut (Provided).
120V
12V
Fixture
COM
Remote
Transformer
COM
