1 Safety Instructions
1.1 Intended Use
Tek-Bar 3120B is a Smart Gauge Pressure Transmitter used for pressure, flow, level and
density measurement of steam and liquids.
The manufacturer is not liable for damage caused by improper or non-designated use.
1.2 Certification
Tek-Bar 3120B has
^
approval (Class I Div. I)
1.3 Safety Instructions from the Manufacturer
Disclaimer
The manufacturer will not be held accountable for any damage that happens by using its
product, including, but not limited to direct, indirect, or incidental and consequential
damages.
Any product purchased from the manufacturer is warranted in accordance with the
relevant product documentation and our Terms and Conditions of Sale.
The manufacturer has the right to modify the content of this document, including the
disclaimer, at any time for any reason without prior notice, and will not be answerable in
any way for the possible consequence of such changes.
Product Liability and Warranty
The operator shall bear authority for the suitability of the device for the specific
application. The manufacturer accepts no liability for the consequences of misuse by the
operator. Wrong installation or operation of the devices (systems) will cause the warranty
to be void. The respective Terms and Conditions of Sale, which forms the basis for the
sales contract shall also apply.
Information Concerning the Documentation
To prevent any injury to the operator and damage to the device it is essential to read the
information in this document and read the applicable national standard, and safety
instruction. These operating instructions contain all the information that is required in
various stages, like product identification, incoming acceptance and storage, to mounting,
connection, operation and commissioning through to troubleshooting, maintenance and
disposal.
