Page 12
Key Chord Mapping
Once you have loaded twiddler.cfg you can print out the entire chord mapping and
settings for the Twidder. In Configurator, click on File>Print. This should give you a single
page printout for reference.
Click on the Key Chord Mapping Tab to configure the key part of the Twiddler. On the left
hand side of the screen you will see a list of the currently programmed chords and their
associated key codes.
To edit one of the chords just click on it. In the right pane, a graphic of the Twiddler layout
will appear with the appropriate keys shaded. If you would like to change the mapping,
click on the keys you would like to press instead of the current chord. The key buttons are
toggles, click once to change its state, on or off. Only one key per row is allowed.
Remember to click the Save button to save the new chord to the configuration file. You
may wish to save your changes to a new .cfg file. This way you can have many custom
configuration files suitable for different applications. The Twiddler will use twiddler.cfg only.
Store your other configurations with different file names. Also, remember to back them up to
another drive just in case you reformat your Twiddler.
To create a new chord, click on the New Chord button at the top of the screen. A new line
will be entered into the left pane and will be designated O OOOO with no key mapping
associated with it. Type the key map you would like in the Key Mapping field. The toggle
the keys and thumb buttons you would like to use to invoke this chord. Once complete, click
save.
To Delete a chord, click on the chord that you would like to delete and then click on the
delete chord button at the top of the page.
Mouse Chord Mapping
Mouse chord mapping is done exactly as the Key Chord Mapping outlined above except
you are controlling mouse chords.
