2.
Wi-Fi router is not in the front of building, consider installing a standard
Suppose that
“off- the-shelf” Wi-Fi repeater or range extender. These can be purchased separately as
a plug-in device and are sold in DIY and consumer electronics stores.
6. Installation Guidelines
Following guidelines can be adopted to install the DP1500 doorbell assuming satisfactory
operation of the doorbell at full Wi-Fi range, at desired location:
• Mount the doorbell at the desired height for pedestrian or car users. The camera lens
angle is 130 degrees wide to cover most of the scenarios. The height of installation is
recommended to be 1.3 ~ 1.6 meters.
Note:
Install at the shielded position, to be free from direct sun rays or raining.
• Make sure the availability of electric connection for power adapter behind the wall
where you want to fit the doorbell.
• On stucco, brick or concrete, use the drill bit to drill four holes to install the doorbell as
well as one large whole for its power supply/Ethernet cable in the wall.
• If you’re installing on wood or siding you can directly screws with the help of
screwdriver. Still you will require large hole for power supply.
• You can use double faced adhesive tape for mounting the device on the doors, walls etc.
as shown below:
Rev 1.0
8| P a g e
DP1500 User Manual
