7.
Record settings:
Select recording method. Select Manual, Alarm or Scheduled
recording.
• Manual recording: Turn ON to start recording, turn OFF ends recording.
• Alarm recording: Default is 3 mins, for alarms from either PIR detection, motion
detection or visitor call. User can configure the recording time for 1,2 or 3 mins.
• Scheduled recording: User can select a recording time.
All video files are saved in the SD card. User can see the total space and the
available space of the SD card. User can also format SD card.
8.
Add sensor:
Extension function to add temperature and humidity sensor. (under
development)
9.
Firmware update:
Check firmware update of the doorbell.
Note:
Keep device connected with power when updating firmware.
15. Alarms
15.1 Alarm Information
Following settings are present in the device for alarm:
•
Receive Alarm:
Default is ON. If it is OFF, you will not receive visitors call and alarm.
If turned ON, user ID gets added into push ID list and you receive call or alarm.
•
Alarm push account:
Contains maximum 5 user ID’s in the list.
•
Alarm email:
User can bind email with the application for getting alarm notification
email with photo attached to it, when there is a motion detection in front of your
door.
•
Motion detection:
Default is OFF. When turned ON, if there is movement, device
will send alarm notification to your mobile. If there is motion detection, device will
take picture automatically and send to the set email.
•
Buzzer:
Default is OFF. User can set ring for 1,2 or 3 mins. If enabled, then doorbell
rings when there is a dangerous or unusual condition outside the door.
•
Human infrared detection:
Default is ON. If it is ON, will sense human within 3
meters and push messages to mobile device.
Note:
Enable/disable alarms are valid to all phones.
Rev 1.0
25| P a g e
DP1500 User Manual
