tefen MixRite 2502, Руководство пользователя

Страница: 6 / 8

6
- -
Adjusting the MixRite
Every stroke of the MixRite moves a predetermined volume of water with a
predetermined volume of liquid additive. To adjust the volume of the liquid
additive:
1.
2. Preset the amount of additives according to the Percentage to Water
Scale that is found on the proportioner.
•
Turn the Proportioning Adjuster clock-wise to increase the amount
of additives.
•
Turn the Proportioning Adjuster counter clock-wise to decrease the
amount of additives.
3. Turn the Proportioning Adjuster slightly, until the U-latch holes of the
Proportioning Lock Nut align with the notches in the Proportioner.
4.
Push the U-latch into the U-latch holes of Proportioning Lock Nut until
it is firmly in place.
Adjusting the MixRite
The Air-Bleed Valve
For proper operation, the MixRite should be free of air. Use the air-relief
valve on the cap of the MixRite to release trapped air. After initial operation
of the MixRite, apply pressure to the cap (the air release valve) for several
seconds to open valve that allows trapped air to escape. This air release is
accompanied by a slight loss of water. Release the pressure on the cap to
close the valve.
U-latch
To increase To decrease
Air is released with a
small amount of water
Press to release air