tefen MixRite 2502, Руководство пользователя

Страница: 4 / 8

4
- -
Installing the MixRite On a Bypass line (off line)
Where water is supplied at a higher flow rate, than the working flow rate of
MixRite must be installed on bypass line. The bypass provides the
possibility to close the operation of the pump while water continues to flow
through the line.
1. Install valves to the water line on each side of the pump and a third
valve on the direct line.
2. Install a 50-75 mesh (250-300 micron) filter between the valve and the
pump intake.
3. Install recorder connectors to each of the pipes that connect to the
pump.
4. Attach the pump to the recorder connectors.
5. Position the liquid additive container 1-1.5 meter beneath the pump.
6. Check to ensure that the suction pipe is not bent or folded.
7. Position the drawing pipe into the additive container. Ensure that the
bottom.
Intake
Installation of MixRite on By Pass (off line)
Valve
Additive container
Valve
Filter
Valve