Page | 3
Kibbutz Nahsholim 3081500, Israel
Tel. 972 4 6395554 | Fax. 972 4 6390813 |
2. Assembly Instructions
2.1. Install the pump
2.2. Attach the 2 core cables, outside the pump, to the water meter output, by cables color
code
2.3. Connect the pump outlet to the water system. Ensure that the pump is installed after
a pressure regulator, and that the line's counter pressure does not exceed 2.5 bar
(36 psi).
2.4. Insert the suction tube into the additive tank. Make sure the tube is fully immersed
inside the liquid, but floats above the bottom of the tank.
2.5. Insert the pump's power plug into the socket. Now the blue display and the bottom red
LED are on (constantly), indicating proper functioning.
2.6.
Set the water meter input:
2.6.1.
Press: MODE
+ - + -
2.6.2.
Water meter options:
Power Cable
Connection to
the water meter
Water outlet
NOTE:
Examine check valve position
Water Inlet
Vertical position
