Tefcold UFFS 45, Руководство по эксплуатации

Страница: 15 / 32

C- INSTALLATION OF YOUR PRODUCT
12
PICTURE 3
PICTURE 4 PICTURE 5
WARNING!
In installations performed by Authorized Tefcold Service, Authorized Tefcold Service shall inform the consumer on the suitable
made. This above mentioned process shall also be stated on the relevant installation form by Authorized Tefcold Service. In
responsibility related to such loss shall belong to the consumer.
The operating environment of the product is very important for the smooth operation of your product. While selecting the operat-
ing environment,
Do not place your product exposed to outdoor environment (on the street, avenue, etc.).
Be careful for not obstructing lower shutter of the product with materials such as cardboard, box etc. for a proper
cooling. (Picture 3)
Place the product at least one (1) meter away from heat resources (stove, radiator, electric heater etc.). (Picture 4)
Do not place it opposite to the air conditioner chutes, under fans and direct door and window openings. (Picture 5)
Do not expose to direct sunlight. Operation ratio will increase if sunlight comes to your product’s glass. That means an increase in
the energy consumption.
While approaching your product to the wall, be careful that there is a gap of 150 mm (15 cm) between the wall and back of your
device.
Your product gives the best cooling performance according to the climate condition under the conditions given below. Therefore,
be careful that the temperature of the environment where your product will operate is at these levels.
Climate Class Temperature Range Humidity
Class 3 +16 °C to 25 °C 60% Rh
Class 4 +16 °C to 30 °C 55% Rh
Class 5 +16 °C to 40 °C 45% Rh