TEFAL INTENSE PURE AIR PU4067, Руководство пользователя

Страница: 7 / 48

7
EN
WHERE TO INSTALL THE APPLIANCE
Place the purifier on a flat, stable surface in the room requiring treatment.
To allow the air to circulate freely, avoid placing the appliance behind curtains, below a window, item of furniture
or shelf unit, or close to any other obstacle, and leave at least 50 cm of free space on each side of the appliance.
BEFORE USING THE APPLIANCE FOR THE FIRST TIME
Make sure that the plastic packaging protecting the filters has been removed before using the appliance.
Before the first use, ensure the voltage, frequency and power of your appliance suit your electric supply.
Your appliance can operate using an unearthed plug. It is a class II (double electrical insulation
).
Before switching on your appliance, ensure that:
– the appliance is completely assembled as described in the safety instructions,
– the appliance is placed on a stable, horizontal surface,
– the appliance is positioned in accordance with the instructions given in this manual,
– the air inlets and the oultet grid are completely unobstructed,
– the 4 filters and front panel have been correctly installed (See section “Disassembling/Reassembling filters”).
IMPORTANT: You are advised to switch off and unplug the appliance when not in use.
This appliance is equipped with a device that automatically prevents it from operating if the front door is not
correctly assembled.
Inserting and replacing the filters
This appliance is equipped with 4 types of filters:
Pre-filter Active carbon filter NanoCaptur filter filter
NB: For optimum performance of the appliance, only use filters provided by TEFAL.
To replace the filters, follow the instructions in the section “Disassembling/Reassembling filters” .
Please note: certain filters may emit a temporary slight odour, due to the transport and storage conditions.
SWITCHING THE APPLIANCE ON
Connect the power cord and press the start button (10).
Your appliance will be preset to automatic mode the first time you turn it on.
Thanks to its infrared particle sensor and its gas sensor (model PU6067 only), it detects the level of pollution in
the room and automatically adjusts the filtration speed accordingly.
The air quality indicator changes color to indicate the air quality in the room.
Air quality Air quality indicator color
Filtration speed
(in auto mode)
Excellent Blue
Average Purple
Poor Red