TEFAL IH7218, Руководство пользователя

Страница: 13 / 19

22 23
EN BOOST MODE
TIMER FUNCTION
PAUSE FUNCTION
• Turn on the cooker and select desired cooking function (only available
for “Stir-fry” and “Hotpot” functions), the cooker will heat at designated
power and the LED display will show “P10” for “Stir-fry” function and
“P8” for “Hotpot” function. The on/off light and the desired cooking
function light are on.
• Press to start “Boost” mode and the light is on, it will go to
maximum heating power and display will show “booS” .
• Under the “Boost” mode operation, the power level will be returned to
previous setting under the below 3 conditions:
– press “Boost” mode key again
– press “-” key
– operation after 3 minutes
• During cooking, press “+” or “-” key or sweep to adjust the power level.
• Press to enter the timer function, then press “+” or “-” or sweep to
adjust the cooking time.
• After entering to timer, the screen displays “88:88” and minutes will
flash, then select the time by using “+” or “-”, press to confirm and
select hours. To confirm the time setting, press once or time will be
set if no operation in 5 seconds.
• Timer setting:
a. Press “+” “-” key to adjust the time by minute or hour
b. Press “+” “-” key and hold for 2 seconds, the time will be adjusted
quickly by minute or hour.
c. Sweep in clockwise or anti-clockwise to adjust the time by minute
or hour.
• Maximum time : 23 hours 59 minutes
• Press to stop the cooking process at any time; to resume cooking,
press again.
• Duration time of pause is 1 minute under operation status and 1
minute under no operation status.
• Pause function works even under malfunction or abnormal situation.
SAFEGUARDS
Malfunction description Causes Solutions
E2
Power tube or sensor is open
circuit / short circuit.
Turn off the cooker.
E3
Voltage is over 265V-285V,
the induction cooker will
turn itself off.
Operation resumes after the
voltage returns to normal.
E4
Voltage is under
150V-170V, the induction
cooker will turn itself off.
Operation resumes after the
voltage returns to normal.
E5 Sensor is open circuit. Turn off the cooker.
E6 Sensor is short circuit. Turn off the cooker.
Internal detection system
generate an alarm
If no pot or an unsuitable
pot is sensed on the ceramic
plate.
Place a suitable pot on the
ceramic plate.
Display remains unchanged
• Power tube is overheating,
the induction cooker will
turn itself off.
• Ceramic plate is
overheated and the
temperature sensor is
short circuit, the cooker
will turn itself off.
When the temperature
drops to designated level,
the induction cooker will
start reheating.
Cooker turns off
automatically
If it receives no operation
instruction for a period of
two hours to avoid any
incident at the absence of
the user.
Cooker not working
• Cooker not plugged in or
plug is damaged.
• Unsuitable pot is used.
• Check the appliance is
plugged in the socket, and
the plug is damaged.
• Check the pot size, place
a pot with diameter more
than 12cm.
Cooker suddenly stops
heating during use
• Room temperature is too
high.
• Safety protections is on.
• Check if the room
temperature is too high.
• Check if it is due to safety
protections. In this case,
wait for several minutes
and confirm.