Before using for the first time
• Run the coffee maker for the first time without coffee, rinsing the circuit with
1 litre of water.
Making coffee
(Follow illustrations 1-8)
• Open the Filter holder support using the open
button
(g)
located on the top of the coffee maker.
• Use only cold water and a no. 4 filter paper. Do not
use the glass jug or the thermal flask without the lid.
• Do not exceed the maximum amount of water
indicated on the water tank level indicator.
• This coffee maker is equipped with a drip-stop
feature so that you can serve a cup of coffee
before all the water has finished flowing through.
Return the jug or the insulated pot to its base
quickly to avoid spillage.
• For better heat preservation, rinse the insulated
pot with hot water before use.
• When making coffee in the thermal flask turn the
lid to the right until it is tightly closed. This will
keep the coffee hot. To pour the coffee turn the lid
to the left (approx. ½ turn).
• Wait a few minutes before preparing another pot
of coffee.
Flavour selector
(Follow illustration 9)
• The flavour selector
(h)
allows you to adjust the
strength of the coffee. However, the strength
mainly depends on the amount of ground coffee
you put in the filter. For the most economical
results measure the amount of coffee in the filter
carefully and set the flavour selector to “Normal”.
9
Содержание EXPRESS CI430D
