TEFAL evolutive, Инструкции по применению

Страница: 4 / 5

4
WIRING INSTRUCTIONS
(for uk only)
Wa r n i n g :
this appliance must be earthed.
Important :
the wires in this lead
are coloured in
accordance with
the following codes:
Green and Ye l l o w : earth
B r o w n : live
B l u e : neutral
• Connect the green/yellow wire to the
terminal in the plug marked “E” or by
the earth symbol
or coloured
green or coloured green and yellow.
• Connect the brown wire to the termi-
nal in the plug marked “L” or colou-
red red.
• Connect the blue wire to the terminal
in the plug marked “N” or coloured
black.
• A 13 amp fuse should be fitted when
the appliance is connected to a BS
1363 A plug.
• Seek professional advice if unsure of
the correct procedure for the above.
• Important : if the electrical cord of
this appliance is damaged or shows
signs of wear, it must only be repla-
ced by an authorised Tefal Service
Centre (see section After Sales
Service).
About your factory fitted plug
(supplied with certain models only)
• The cord is already fitted with a plug
incorporating an appropriate fuse. If
the plug does not fit your socket out -
let, see paragraph below. S h o u l d
you need to replace the fuse in the
plug supplied an appropriately rated
approved BS 1362 fuse must be
used (refer to wiring instructions spe-
cification for fuse rating). If the plug
supplied does not fit your socket out-
let, it should be removed from the
mains lead and disposed of safety.
The flexible cord insulation should
be stripped back as appropriate and
a suitable alternative plug fitted.
• If the plug has external access to the
fuse (non-rewirable type plug) plea-
se note that the fuse cover is an
important part of the plug. Please
ensure that it is always refitted cor-
rectly. If you lose this cover please
do not use the plug. You may contact
Tefal UK Limited for a replacement.