TEFAL DV91XX, Руководство пользователя

Страница: 10 / 24

77
USE
During use or while heating or cooling, do not rest appliance on its soleplate. Place the
product on its iron rest support (- fig. 4), on heat resistant , flat surface, as the soleplate
will be hot. As the appliance heats, the housing becomes warm. This is normal.
• After the light is fixed, the appliance has reached the appropriate temperature.
• To begin steaming, press the steam button with the appliance facing away from you
- fig.7 .
1. Starting Up
When the appliance is plugged in the soleplate heats.
Do not touch or remove the fabric brush accessory without letting the soleplate cool
down.
• Plug in the appliance, place it on the iron rest support and wait approximately 45 seconds for it
to reach full temperature before using.
As appliance is very hot: never attempt to remove creases from a garment while it
is being worn. (fig. 9)
Steaming clothes
Before removing or attaching the accessory, unplug your appliance and let it cool
down for one hour minimum.
The appliance is equipped with a fabric brush accessory*.
• To insert the accessory the appliance must be cold. Slide forward until it locks into place by
pulling the locker. (Fig.6)
• You can use the appliance with or without the accessory. (Fig.5 to 8)
• Hang the garment on a hanger for vertical steaming, or on an ironing board for horizontal
ironing. (Fig. 5 & 8) .
• Gently unlock the fabric brush by pulling the locker and remove it. Always do this operation
when the appliance is cold.
As steam is very hot: never attempt to remove creases from a garment while it is
being worn, always hang garments on a clothes hanger. (fig. 9)
• For steam, press on steam trigger. - fig.7 .
• The combination of steam and fabric brush will gently remove the creases.
• After use, let the garment cool down on the hanger before wearing.
Tips: Check the fabric’s label for recommendations. We recommend that you test fabrics
in an inconspicuous area to ensure these fabrics are not damaged by hot steam.