TEFAL DV8610E1, Инструкция по эксплуатации, Страница: 9 / 66

7
EN
Problems Possible causes Solutions
There is no steam. The steamer is not
plugged in.
The water level is too low.
The steam button trigger
has not been primed.
You use the appliance for
the first time.
The water tank is not in
place.
The appliance is not hot
enough.
The appliance is jammed
by calc.
Check that your appliance is correctly
plugged in.
Remove tank and refill it.
Press the steam button trigger successively
for a few seconds to begin steaming.
When the appliance is new, press the steam
button trigger a few times.
Ensure that the water tank snaps in when put
into place (full lock).
Plug in your appliance.
Adjust temperature dial and wait for stable
temperature.
Apply «Maintenance descaling procedure».
The appliance does
not heat.
It is not plugged in. Allow your steam brush to heat for
approximately 60 seconds before using.
Water leaks or spits. The water tank is not in
place.
Your appliance is not hot
enough.
Ensure that the temperature dial is at 3 dots
or more.
Wait for 60 seconds so that the appliance is
ready to steam.
The steam leaves
stains on the fabric.
You are using water with
additives.
Never add any product additives in the water
tank.
Environment protection first !
i
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
IS THERE A PROBLEM ?