EN
Owner’s manual
14
•
Do not overfill beaker. Maximum ingredients volume for beaker is 600 ml.
•
To avoid splashing, turn on the device only after the blender/whisk has been inserted
into food to be processed.
•
Short-time operating: Use the appliance for no longer than 1 minute at a time; after that
let the device cool down for at least 1 minute. Please regard 1 minute of operation and
1 minute of rest as a
one operation cycle
. After continuous operating the device of 5
cycles (that is 1 min. operation followed by 1 minute rest, 5 times in a row), the blender
must be left for cooling for about 30 minutes.
•
Don’t operate hard food for longer than 10 seconds at once.
•
Do not use the appliance for dry grinding hard food like soybean, rice and frozen meat,
ice cubes, nutmeg, coffee beans, grains etc., nor for succulent liquid food processing.
Don’t operate food without water!
•
Food preparation before processing: cut the food into cubic blocks no bigger than
1,5x1,5 cm, and add some liquid (e.g. water, milk, etc.).
•
Before processing food, make sure it’s pitted, peeled, cutted if necessary etc.
•
Don’t place the device into hot ingredients / don’t place hot ingredients into the beaker.
Hot ingredients should be cooled down prior to processing by this appliance. (Max.
ingredient temperature is 60°C).
CLEANING AND MAINTENANCE
•
Always disconnect the device from mains supply before cleaning or storing.
•
Motor unit should be cleaned only with soft, slightly damp cloth. Never immerse motor
unit into water or any other liquid.
•
After processing very salty food, it is suggested to rise the blades right away.
•
Wash the accessories (blender, whisk) in warm, soapy water after every use. Rinse well.
•
All parts except for motor body can be cleaned in a dishwasher (only if the set temperature is
below 50ºC). When cleaning in a dishwasher, be careful not to overdose cleaner or decalcifier.
•
When processing food with color, the plastic parts of the appliance may discolor. Wipe
these parts with vegetable oil before cleaning them.
•
Cleaning should be performed immediately after use.
•
The blade is very sharp – exercise caution when handling the blade!
•
Let the device dry completely before assembling or storing.
•
Do not use strong detergents or sharp utensils to clean the device, as they may damage
the appliance.
TROUBLESHOOTING
Problem
Possible reason
Suggested solution
The motor running,
but the blade/
whisk doesn’t work
•
The blending stick has
not been assembled
properly
•
The blade/whisk got
stuck
•
Make sure to assemble the device
properly
•
Disconnect the device from power
supply mains, and remove the food from
the blades/whisk – be careful, the blades
are very sharp. Take out the food material
and cut them into small pieces
Содержание TSA3521
Страница 2: ......
Страница 34: ...34 Notes ...
Страница 35: ......
Страница 36: ...www teesa pl ...
