Teesa TSA2010, Руководство пользователя

Страница: 11 / 32

Owner’s manual 11
EN
DO NOT leave the hot iron touching fabrics or very inflammable surfaces.
DO NOT leave the appliance unnecessarily plugged in. Disconnect the plug from the mains
when the appliance is not in use.
NEVER
touch the appliance with wet or damp hands.
DO NOT
use the power cord or the appliance in order to pull the plug out of the socket.
DO NOT leave the appliance exposed to weather conditions (rain, sun, etc.).
DO NOT leave the iron without supervision when it’s connected to the power supply.
DO NOT fill the water reservoir before removing the plug from the socket.
NOTE!
Do not use chemical additive, scented substances or decalcifiers. Failure to comply with the
above-mentioned regulations leads to the loss of guarantee.
GENERAL INSTRUCTIONS
Note :
Remember to keep the base smooth. Do not run it over metal objects (such as against the
ironing board, buttons, zips, etc.), as it may damage iron’s surface.
Pure wool fibers (100% wool) can be ironed with the appliance in the steam position. Set
temperature to “wool”, select a high steam position and use a dry ironing cloth over the
material.
SUGGESTIONS BEFORE FIRST USE
1. Before using the iron for the first time, remove the plastic protector from the base (if it has
one) and clean the base with a soft cloth.
2. It is recommend to pass the iron over an ordinary cloth before using it for the first time.
3. When using the iron for the first time, you may notice a slight emission of smoke and hear
some sounds made by the expanding plastics. This is quite normal and it stops after a
short time.
4. Certain parts of the iron have been lightly greased; therefore the iron could give off a little
smoke when plugged in for the first time. This will cease after a short while.
SELECTING THE TEMPERATURE
1. Check the ironing instructions on the garment to be ironed.
2. If the garment does not have any ironing instructions but you know the kind of fabric in
question, use the chart below.
3. Fabrics that have some kind of finish (polishing, wrinkles, contrasts, etc.) can be ironed at
the lowest temperatures.
4. If the fabric contains several kinds of fibers, use the lowest temperature recommended
for the fibers in the blend; if an article contains 60% polyester and 40% cotton, you must
choose the temperature corresponding to polyester and iron without steam.
5. Group the articles to be ironed, according to their ironing temperature: wool with wool,