Teesa CUT PRO X400, Руководство пользователя

Страница: 10 / 32

EN
Owner’s manual 10
INSERTING AND REMOVING THE COMBS
Notes:
• Make sure that the appliance is turned off when attaching or removing the combs.
• The set includes four combs, each of them having different cutting lengths- 3, 6, 9 and
12 mm.
1. Choose the desired comb.
2. Slide the upper part of the comb onto the teeth of the cutter and then push lower part
of the comb on the appliance so that the projection at the bottom of the comb locks
on the cutter (you will hear a click). Remove the comb from the blade by pushing it
upwards.
3. Remove the comb by pushing the projection of the comb upwards.
IMPORTANT!
• DO NOT PLACE THE APPLIANCE IN WATER OR ANY LIQUID; NOR HANDLE/ USE IT WITH WET OR
MOIST HANDS.
• DO NOT USE THE APPLIANCE NEAR WATER CONTAINED IN BATHTUBS, SINKS OR IN OTHER
CONTAINERS.
• DO NOT PLACE OR STORE THE APPLIANCE WHERE IT CAN FALL OR BE PULLED INTO A TUB OR
SINK.
• DO NOT REACH FOR THE APPLIANCE THAT HAS FALLEN INTO WATER. UNPLUG IT IMMEDIATELY.
TIPS BEFORE TRIMMING
• Prior to trimming, make sure hair is dry and clean.
• Trim small amount of hair at a time.
• For the first use or when the user is not acquainted with the appliance, it is
recommended not to trim to a short haircut. To achieve longer haircut, use a comb
with higher markings (9, 12 mm).
• Hair length after trimming depends on the comb used. There are markings on each
of the combs: 3 mm, 6 mm, 9 mm and 12 mm. Each marking corresponds to the hair
length achieved after trimming.