
81
98-05273-EN R7
MATRIX
®
Pro 570GS • MATRIX
®
Pro840GS
HOME
SE
TUP
FULL SCREEN
IMPLEMENT
INTR
ODUC
TION
GNSS
RA
TE C
ONTR
OL
APPENDIX
GUID
ANCE
MAPPING OPTIONS
On vehicle view or field view guidance screens, in any guidance
mode, the mapping options tab displays options to display polygon
maps, coverage maps and application maps.
Polygon and coverage mapping are available when a polygon has
been established.
GNSS-based product application mapping is available when a
rate controller is on the system. Rate control mapping can record
areas covered by the implement (coverage) or how much product
has been applied and where (application), and can direct single-
and variable-rate product application (preset target rate and
prescription, respectively).
• Coverage map – shows areas covered by the implement,
regardless of whether product was applied
• Polygons – shows all mapped polygons
• Prescription map – pre-loaded map that provides
information to the rate controller for use in applying product
• Application map – shows how much product has been
applied and where, using colour to indicate level in proportion
to preset or automatically set maximum and minimum levels
• Target rate map – shows the application rate that the rate
controller attempted to achieve at each location
NOTE: Before using mapping, set or verify product mapping
options under Configuration
-
>
Product. Refer to “Product”
in the System setup chapter. For more information on
application mapping, see the Rate control chapter of this
manual.
Polygon mapping
To access polygon mapping:
1. Press MAPPING OPTIONS tab
to display mapping
options.
2. Select one or more:
►Coverage map
►Polygons
Figure 7-32: Coverage map with polygons
27.00
ha
10.0
km/h
Mark A
27.00
ha
10.0
km/h
Mark A
Rate control mapping
To access rate control mapping:
1. Press MAPPING OPTIONS tab
to display mapping
options.
2. Select one or more:
►Coverage map
►Prescription map
►Application map
►Target rate map
NOTE: Application map and target rate map cannot be selected
simultaneously.