TeeJet 844-AB, Руководство пользователя

Страница: 22 / 31

844-AB Sprayer control 21
Software 4.03
Chapter 6 - Swath Width
Presets
The 844-AB can be programmed with up to 6
swath widths. This allows the operator to
easily change from one swath to another
during application. (This is essential when
spraying orchards that have varying swath
widths.)
To enter Swath Width Presets mode, press
and hold the GREEN button for 3 seconds.
The swath width setting screen for preset
number 1 will be displayed. The swath width is
displayed on the lower right of the console
(measured in feet for US units and meters for
SI [metric] units).
Figure 6-1: Entering Swath Width Presets
1111
1 2 3 4 5 6 7 8 9 10 11 12
P
RO
---- 1111---- 3.50
3.50 3.50
3.50
Use the Plus and Minus keys to adjust the
value for the first swath preset. Press the
GREEN button or the Program key to advance
to the next swath preset. Use the Plus and
Minus keys to adjust the swath value.
Continue this process through the six possible
presets. If all six presets are not required,
enter values only for the necessary number of
presets. All others should be set to “0”. Values
set to “0” will not be available for selection.
Once the presets have been entered, press
the GREEN button or the Program key to
return to the Operations mode.
Figure 6-2: Entering Swath Width (Continued)
1111
1 2 3 4 5 6 7 8 9 10 11 12
P
RO
---- 4
4 4
4---- 5.0
5.0 5.0
5.00
0 0
0
Selecting Swath Preset
Once the swath widths are programmed,
select the swath width to be used by pressing
the GREEN button during Operations mode.
The console will display which swath preset is
being used. If the preset displayed is correct,
press the Program key to return to Operations
mode.
Figure 6-3: Swath Width Selection
---- 1111 ----
1 2 3 4 5 6 7 8 9 10 11 12
3.50 3.50 3.50 3.50
Should a different swath preset be desired,
press the GREEN button again to advance to
the next swath selection. Continue to press
the GREEN button until the appropriate swath
preset is displayed. Press the Program key to
select the preset and return to Operations
mode.
NOTE:
When toggling through swath width
selections, only those with presets
programmed will be displayed (if presents
5 and 6 are set to “0”, they will not be
displayed).