5.0 in
127.0 mm
Ø0.27 in ± 0.01 in drill thru x 4
Ø6.858 mm ± 0.01 mm drill thru x 4
6.25 in
158.75 mm
0.50 in x 4
12.7 mm x 4
0.50 in x 4
12.7 mm x 4
This side will route
toward back of vehicle
www.teejet.com
TEEJET TECHNOLOGIES
MOUNTING INSTRUCTIONS
The RX520 is equipped with four (4) built-in magnets for attaching to the included mounting bracket. The mounting bracket can be secured to the base
surface using traditional fasteners.
Intermediate Mounting Plate Template
A template for the intermediate mounting plate has been drawn in the
background of this user guide.
•
Red lines indicate holes where attachment will occur.
•
Green lines indicate the outline of the mount and other holes for
attaching the release plate.
Mounting Considerations
•
Choose a location that has a clear view of the sky so that each satellite
above the horizon can be tracked without obstruction.
•
When mounting the RX520 Receiver, a space of at least 15 cm between
the receiver and any bend in the cable is required. Any length shorter
than 15 cm puts undue stress on the cable and the enclosure for the
RX520.
•
The receiver should not be mounted where water can pool around it.
The receiver housing is designed to withstand rain and splashing, but
not submersion in liquids for sustained periods of time.
•
Mount the receiver above all other metal objects to avoid multipath.
Satellite signals received by the GNSS receiver by a reflection from an
object can decrease positioning accuracy. For example, roof racks, large
headlight enclosures, etc., can cause multipath that may result in a jump
in GNSS position.
Figure 2: Mounting Plate
Figure 3: Orientation Example
Route cable toward
the back of vehicle
Orient toward
the front of vehicle
